Monday 19 November 2012

Know if your neighbours are stealing your Wifi connection

Command prompt codes

Command Prompt can let you know if someone is connected to your Local Area Connection and using it. Just follow the steps:-
1) Open your browser and visit http://192.168.1.1 or http://192.168.0.1 depending on your router.
2) Find the tab that mentions “Attached Devices” or something similar.
3) Find the computer name, IP address and MAC Address (sometimes called Physical Address or Hardware Address) of your computer using the previous trick.
4 )Compare it with those displayed by your router in Step 2. If you notice some strange devices, then your neighbour has been sneaking in on your internet connection and it is best to set a password.

4 comments:

  1. This comment has been removed by a blog administrator.

    ReplyDelete
  2. I would like to thank you because your site’s blog is very informative and very knowledgeable. I shared your site with my friends because they can take information from your site. I found some sites relate your site Check link Below...
    Thank you..

    Avast Login
    garmin.com/express
    avg.com/retail
    bullguard login
    mcafee.com/activate

    ReplyDelete
  3. I was worried about this topic but after reading this post I am really much satisfied as all information given in this post is reliable.How to enable IMAP in Gmail?

    ReplyDelete
  4. WiFi router has channels. At times, it is only by changing the channel on the router that can make a world of difference. This is mostly seen in those apartments with numerous interference from other WiFi broadband signals. 192.168.2.1



    ReplyDelete